CONSENTINO DEKTON MASTIDEK CARTRIDGE GLUE GALEMA 215 ML
Designed for use with Dekton Galema and Lumina. This new - generation bi - component resin glue for Cosentino Dekton offers a super - fast adhesion. In just about 45 - 60 minutes, you can cut and polish the assembled parts. The hardened glue is extremely shiny and highly polishable.
Comes in special 215 - ml cartridges with a 2:1 bi - axial quantity. The glue and hardener are pre - dosed. Once you insert it into the proper M200XMR Cartridge Gun and attach the special mixer on top, it ensures correct extrusion and mixing. It's perfect for outdoor use.
DIRECTIONS FOR USE:
Make sure all surfaces are clean, free of dust and grease. If you're gluing a polished or glossy surface, sand it first. Remove the cap, attach the special threaded mixing nozzle. Squeeze out about 6 inches of the product before applying. Clean the nozzle after use, replace the cap, and throw away the mixing nozzle. Do this every time you change the mixer. The product won't set below 32 °.
SHELF LIFE:
Store the cartridge between 65 ° and 77 °, and it will last at least 12 months. Keep it away from sunlight, heat, and humidity.
SAFETY:
Read the safety data sheet before use and follow the product instructions.
This Cosentino Galema Dekton Mastidek Fast Outdoor Glue Cartridge is great for use with Dekton Galema and Lumina. To use it, first, clean the surfaces you want to glue. They should be free of dust and grease. If the surface is polished or glossy, sand it with sandpaper. Then, remove the cap of the cartridge and attach the special threaded mixing nozzle. Squeeze out about 6 inches of the glue before applying it to the surface. After using, clean the nozzle, put the cap back on, and throw away the mixing nozzle. Do the same when you change the mixer. Remember, the glue won't set if the temperature is below 32 °. When storing, keep the cartridge between 65 ° and 77 °, away from sunlight, heat, and humidity. It can last at least 12 months this way. Before using, always read the safety data sheet and follow the product instructions.
