Alpha Vetro Blade - Top - Notch Wet Cutting Blade for Glass Tiles
The Alpha® Vetro Blade is crafted for high - speed wet cutting of glass. It has a smooth continuous diamond rim and a bond hardness that's perfect for glass materials. This design results in cuts with hardly any chipping. Whether you're plunge cutting, trimming near glass edges, or cutting an internal radius, the Alpha® Vetro is a great pick. It must be used wet. When you use the 4 - 3/8' size on the AWS - 110 Wet Stone Cutter, it offers a portable, dust - free way to cut thick glass. With high - quality cuts that are straight and true, and minimal chipping even at the glass edges, it reduces waste and is very cost - effective. It's the go - to blade for glass contractors seeking a high - speed, portable, and long - lasting cutting solution.
- For wet use only
- Designed for chip - free cutting
- Preferred by tile installers for glass tiles
- The best wet cutting glass blade on the market
- Chip - free cutting for tough applications
| Part No. | Size | Thickness | Maximum RPM | Arbor(s) | For Use On |
|---|
| WG0438 | 4 - 3/8' | 1.0mm | 13,200 | 7/8', 20mm | Stone Cutter |
| WG0700 | 7' | 1.6mm | 8,400 | 5/8' | Tile Saw |
| WG0800 | 8' | 1.6mm | 7,400 | 5/8' | Tile Saw |
| WG1000 | 10' | 1.6mm | 5,900 | 5/8' | Tile Saw |
Using the Alpha Vetro blade is easy. First, make sure you're using it on the right machine as indicated by the part number details (like using WG0438 on a Stone Cutter). Always use it wet, as dry use can damage the blade and reduce its performance. When cutting, start slowly and let the blade do its job. Don't force it. This will help you get those chip - free cuts. As for maintenance, after each use, clean the blade with water to remove any debris. Store it in a dry place to prevent rust. And remember, always follow the maximum RPM limit to keep the blade in good condition and ensure your safety.
