Meet the Blade Master, the ultimate laser-welded segmented diamond blade for cured concrete. It offers the best cost/performance ratio in the market. With a 14mm segment height and multi-layer arranged diamond technology, it cuts at high speed and lasts long on popular high-speed demolition saws. Even though it's for high-speed use, its multi-layer diamond tech and titanium-coated premium diamond grit let it work on 5 - 25 HP motor saws. It can cut a wide range of materials, whether wet or dry. Key features include high-quality laser-welded segmented blades for high-speed demolition saws, easy slicing through materials, working on concrete with re-bar, steel, stone, metal, wood, glass, and rubberized materials, fitting masonry saws and road cutters, being usable wet or dry, and being available in 12', 14', and 16' diameters. Here are the specifications:
| Part No. | Size | Thickness | Maximum RPM | Arbor(s) | Recommended For |
|---|
| BML1214 | 12' | 2.9mm | 6,200 | 1' w/pin hole | Cured Concrete |
| BML1414 | 14' | 3.0mm | 5,360 | 1' w/pin hole | Cured Concrete |
| BML1614 | 16' | 3.1mm | 4,700 | 1' w/pin hole | Cured Concrete |
Using the Blade Master is quite simple. First, make sure your saw is within the 5 - 25 HP motor range. Select the right blade size (12', 14', or 16') according to your needs. Install the blade on your saw properly, following the saw's instructions. When cutting, you can choose to use it wet or dry. If you're using it wet, connect a water source to cool the blade and reduce dust. When cutting different materials like concrete with re - bar, steel, or stone, adjust the cutting speed as needed. Remember, don't force the blade too hard; let it do the work at its own pace. For maintenance, after each use, clean the blade to remove any debris. Check the blade regularly for any signs of damage. If you notice any cracks or excessive wear, replace the blade immediately. Store the blade in a dry place to prevent rusting.
