Heavy Duty Orange Cured Concrete Diamond Blades - H

These high - performance heavy - duty orange cured concrete diamond blades come in three types: standard, Pro Heavy Duty - TH, and Super Heavy Duty - SH. The standard blades have taller segments and a high diamond concentration, with a 0.250 - inch diamond depth. Pro Heavy Duty - TH blades feature a 0.310 - inch diamond depth, taller segments, and high diamond concentration. Super Heavy Duty - SH blades offer a 0.375 - inch diamond depth, even taller segments, higher diamond concentration, fast cutting speed, and work well with a wide range of high or low HP saws, combining long - life performance and cost - effectiveness. Available blade sizes include various combinations like 10' x .110, 12' x .125, etc. A 1 - inch arbor with a drive pin hole is standard, and custom arbor sizes/types are available. There's no charge for 'X' slant seg wear protection or custom bolt patterns. Water is required to cool the blades during cutting for maximum performance.

Using these diamond blades is quite straightforward. First, make sure you select the right type of blade according to your cutting needs. If you're dealing with light - to - medium - duty tasks, the standard blade might be enough. For more challenging jobs, go for the Pro Heavy Duty - TH or Super Heavy Duty - SH blades. When installing the blade, ensure it's properly attached to your saw with the correct arbor size. You can use the standard 1 - inch arbor, or if you need a custom one, specify it when ordering. During the cutting process, always use water to cool the blade. This will not only ensure maximum performance but also extend the blade's lifespan. After each use, clean the blade to remove any debris. Store the blade in a dry place to prevent rusting. If you have any questions about the blade sizes or custom features, don't hesitate to ask.