The Stinger Black V2 Bridge Saw Blade is a top - notch tool for cutting stone. It has a 25mm patterned diamond segment crafted from high - quality synthetic diamonds, ensuring outstanding cutting performance. This blade offers the fastest and cleanest cuts on today's leading natural and engineered stone materials. Whether it's plunge cutting, miter cutting, or straight cutting, the Stinger Black V2 handles them all with ease. For bridge saw blades, here are the maximum recommended specifications. The settings below are for straight cutting, and for miter cutting, reduce the feed rate to 20 - 40% of the straight - cutting recommendation. Start at the lowest recommended setting for each blade and increase it until the finish isn't good or you exceed the machine manufacturer's recommended amp draw. It can be used on engineered stone, granite, quartz, and quartzite. The arbor is available in 50mm/60mm, and the blade diameters are 12, 14, 16, and 18. It's designed for bridge saws, with a segment height of 25mm and is from The Stinger Black™ brand.
Using the Stinger Black V2 Bridge Saw Blade is easy. First, make sure you select the right blade diameter and arbor size for your bridge saw. For straight cutting, use the recommended settings provided. When doing miter cutting, remember to reduce the feed rate to 20 - 40% of the straight - cutting rate. Start at the lowest setting for the blade and gradually increase it. Keep an eye on the cut finish and the machine's amp draw. If the finish looks bad or the amp draw goes beyond the machine manufacturer's recommendation, stop increasing the setting. As for maintenance, after each use, clean the blade to remove any stone debris. Store it in a dry place to prevent rusting. If you notice any damage to the blade, replace it right away to ensure safety and good cutting performance.
