Premium Tuck Pointing Blade - Enhanced Plus Model
Suitable for Both Dry and Wet Use
Ideal for Mortar, Masonry, and Concrete Applications
Designed for Angle Grinders
Model | Description | Segment Height |
DTS-PM30N0425C | 4 X .250 X 7/8 - 5/8 | 10MM (.394') |
DTS-PM30N0450C | 4 X .500 X 7/8 - 5/8 | 10MM (.394') |
DTS-PM30N4525C | 4.5 X .250 X 7/8 - 5/8 | 10MM (.394') |
DTS-PM30N0525C | 5 X .250 X 7/8 - 5/8 | 10MM (.394') |
DTS-PM30N0625C | 6 X .250 X 7/8 - 5/8 | 10MM (.394') |
DTS-PM30N0725C | 7 X .250 X 7/8 - 5/8 | 10MM (.394') |
Using this tuck point blade is easy. First, make sure your angle grinder is turned off and unplugged. Then, securely attach the blade to the grinder according to the grinder's instructions. You can use this blade for both dry and wet applications. For dry use, just start the grinder and begin working on your mortar, masonry, or concrete surface. For wet use, you can connect a water source to keep the blade cool and reduce dust. When using the blade, always wear safety goggles and a dust mask to protect yourself. Don't apply too much pressure on the blade as it can cause damage. After each use, clean the blade with a brush to remove any debris. Store the blade in a dry place to prevent rusting. If the blade becomes dull or damaged, replace it with a new one to ensure the best performance.
