Standard Tuck Point Blade
This tuck point blade is suitable for both dry and wet applications. It's designed for use with angle grinders and is perfect for working on mortar, masonry, and concrete. Here are the available models:
Model | Description | Seg. Height |
DTS - PM30ET4525C | 4.5 X .250 X 7/8 - 5/8, with Punch Hole Core | 10MM (.394') |
DTS - PM30ET0525C | 5 X .250 X 7/8 - 5/8, with Punch Hole Core | 10MM (.394') |
Using this tuck point blade is easy. First, make sure your angle grinder is turned off and unplugged. Then, securely attach the blade to the grinder according to the grinder's instructions. For dry applications, you can start using the blade right away. For wet applications, connect a water source to keep the blade cool and reduce dust. When working, move the grinder smoothly over the mortar, masonry, or concrete. Be careful not to apply too much pressure as it may damage the blade. After use, turn off the grinder and let it cool down. Clean the blade with a brush to remove any debris. Store the blade in a dry place to prevent rusting.
