This standard tuck point blade is suitable for both dry and wet applications. It can be used on mortar, masonry, and concrete. The blade is designed for use with an angle grinder. There are multiple models available, such as DTS - PM30M0425C with dimensions 4 X.250 X 7/8 - 5/8 and a segment height of 8MM (.315'), DTS - PM30M0437C with 4 X.375 X 7/8 - 5/8, and many others. Each model offers different size combinations to meet various needs.
Using this tuck point blade is easy. First, make sure your angle grinder is turned off and unplugged. Then, carefully install the blade according to the grinder's instructions. For dry applications, you can start working right away. For wet applications, connect a water source to keep the blade cool and reduce dust. When using, hold the grinder firmly and move it steadily along the surface. Always wear safety goggles, gloves, and a dust mask to protect yourself. After use, clean the blade with water to remove any debris. Store it in a dry place to prevent rust. Don't use the blade if it's damaged or worn out. Replace it promptly to ensure safe and efficient operation.
