0-12 Regular Duty L-Clamp/Black Oxide Spindle

Palmgren's L - clamps are a time - and labor - saving solution that significantly boosts productivity, offering outstanding value. Just effortlessly slide the clamping arm onto the workpiece and tighten it. Once the job is done, simply loosen the spindle and slide the arm back. These L - clamps can handle various workpiece sizes and shapes, enabling you to clamp workpieces faster and use fewer clamps per job. The spring - tempered and hardened steel frames are innovative, optimizing high static stress loadings. The dropped forged sliding clamping arm adds strength and durability. The fully hardened steel spindles have greater loading capabilities and a longer service life. The black - oxide plated spindles resist wear and prevent rust. With replaceable swivel pads, one clamp can accommodate a wide range of workpiece sizes and shapes. Plus, it comes with a lifetime guarantee against breakage.

Using your L - clamp is easy. First, find the workpiece you want to hold. Slide the clamping arm onto the workpiece. Then, turn the spindle to tighten it until the workpiece is firmly held. When you're done with your job, turn the spindle in the opposite direction to loosen it and slide the clamping arm back. Here are some things to keep in mind. Don't over - tighten the spindle as it might damage the clamp or the workpiece. Also, avoid using the clamp on very rough or sharp - edged workpieces without proper protection. For maintenance, keep the clamp clean. After use, wipe it with a dry cloth. If it gets dirty, you can use a mild cleaner. Check the replaceable swivel pads regularly and replace them if they're worn out. This way, your L - clamp will serve you well for a long time.