These high - performance 1/4' shank carbide burrs are designed for aluminum and soft non - ferrous metals. Made from the highest grade tungsten carbide, they are manufactured with extreme accuracy to ensure perfect concentricity and balance. They offer rapid material removal and have an incredibly long lifespan. Features include an alternate diamond pattern, anti - clogging design, fast removal with a fine finish, long life, maximum performance, perfect balance, and special burrs with a coarse pitch. Ideal for applications like enlarging, fine finishing, and material removal. Technical specifications are as follows. There are various shapes such as cylindrical (SB, SA), cylindrical round nose (SC), ball (SD), tree (SF), cone (SL), and egg (SE). Different shapes come with different diameters, lengths, and order numbers, all with a 1/4' shank diameter and a standard package of 1 unit.
Using these carbide burrs is quite simple. First, choose the right shape and size based on your project. For example, if you need to do fine finishing, a cylindrical round nose burr might be a good choice. Then, securely attach the burr to your tool. When using it, apply moderate pressure and move the tool steadily over the material. Don't press too hard as it could damage the burr or the material. Also, make sure to work in a well - ventilated area as there might be some dust. After use, clean the burr with a soft brush to remove any debris. Store it in a dry place to prevent rusting. This will help keep your burr in good condition and ready for the next project.
