Adjustable Spreader Beams

Lift uneven loads safely and keep them level! These adjustable spreader beams come with two lower bails and one upper bail. You can adjust the bails in 4 - foot increments. The bails smoothly slide between two 5 - foot high C - Channels (an 8 - foot high model SBM - 80 is also available). They meet the ASME B30.20 - 1993 standard. The baked - in powder - coated finish makes them super tough. The SBM - BFB - 100 - 10 models offer the same great safety features. It includes one upper bail and two specially - designed bail/sling holders. Bails are adjustable in 4 - foot increments and slide between two 5 - foot high C - Channels. It also meets the ASME B30.20 - 1993 standard and has a tough powder - coated finish. Polyester lifting slings are sold separately, and additional bails can be purchased. Additional bail hardware is sold separately too.

Using these adjustable spreader beams is easy. First, attach the upper bail to your lifting equipment. Then, adjust the lower bails in 4 - foot increments according to the size of your uneven load. Slide the bails between the C - Channels to get the right position. Make sure the load is properly balanced on the bails. When using, always check if the spreader beams meet the ASME B30.20 - 1993 standard. Polyester lifting slings need to be bought separately and attached correctly. For maintenance, keep the beams clean. If there are any signs of wear on the powder - coated finish, have it recoated. Additional bails and hardware can be bought if needed, but always make sure they are compatible with your spreader beams.