MB-22® E-Z Polishing Kit: Professional-Grade Marble & Terrazzo Shining Solution
Why Opt for the MB-22® E-Z Polishing Kit?
✔ Professionals' Trusted Pick – Get expert support before you buy.
✔ Full Satisfaction – No weak formulas here.
✔ Natural Stone Safe – Ideal for marble, granite, travertine, and more.
✔ Top-Notch Ingredients – High-quality formulation for great results.
✔ Rigorously Tested – Ensures product effectiveness.
All-in-One for a Stunning Shine
The MB-22® E-Z Polishing Kit has everything to polish and restore marble and terrazzo surfaces. This advanced powder gives an amazing shine without etching, even if it splatters. Specially made for calcite-based stones, it's perfect for pros and DIYers.
What's in the Kit:
- (1) 8 oz MB-22® E-Z Polish
- (1) 5-inch Drill Attachment with Pad Driver
- (2) 5-inch Hogs Hair Pads
- (1) 5-inch White Pad
- (1) Easy Oxy Quart with Sprayer
- (1) Set of Instructions
How to Use:
- Prep Work: Protect nearby surfaces. Wear safety glasses and gloves. Make sure the area is clean, no coatings, wax, sealers, grease, or dirt.
- Application: Use a right-angle grinder/polisher (variable speed) with the drill attachment and hogs' hair pad. Apply 1/3 oz per 2 - 3 square feet and add some water to make a thick paste.
- Polishing: Put the mixture in the middle of the area, add water, and spread it. Apply light, even pressure and run the machine on a slow setting (about 1 minute per square foot).
- Edge Work: For edges, sinks, and tight spots, use a white pad cut 1/2 inch over the pad driver for extra protection.
Need Help? Call +1 (800) 342-3876 for expert support.
The MB-22 E-Z Polishing Kit is an all - in - one solution for polishing marble and terrazzo surfaces. Here's how to use it: First, do the prep work. Protect the nearby areas so that the polish doesn't get on them. Wear safety glasses to protect your eyes and gloves to protect your hands. Also, make sure the surface you're working on is clean, free from things like coatings, wax, sealers, grease, and dirt. When it comes to application, use a right - angle grinder or polisher with variable speed. Attach the drill attachment and hogs' hair pad. Spread 1/3 oz of the polish per 2 - 3 square feet and add just enough water to form a thick paste. For polishing, place the paste in the middle of the area, add some water, and spread it around. Apply light and even pressure while running the machine on a slow setting. Spend about a minute per square foot. When working near edges, sinks, or in tight spaces, use a white pad that's cut 1/2 inch larger than the pad driver for added protection. Remember, if you have any questions or need help, just call +1 (800) 342 - 3876 for expert support.
