PM1900TX-CK1 Dust Collector, 3HP 1PH 230V, 2-Micron Canister Kit

The PM1900 Dust Collector is a top - notch solution for your dust collection needs. It comes with the exclusive TurboCone™ technology, which effectively separates chips to prevent filter clogging and boosts the packing efficiency of the collector bag. The canister filter has a larger filtering surface area than standard bags, capturing 98% of 2 - micron particles. You can set the digital timer for up to 99 minutes and operate it remotely using the infrared sensor. The all - metal duct enhances rigidity and air flow. The large - capacity clear collector bags reduce the time spent on changing them. With four swivel casters and conveniently placed handles, it's easy to move around. Key features include 2 - micron canister filters for better fine dust capture, all - metal duct for rigidity and airflow, elimination of premature filter clogging, a remote - controlled digital timer, a steel impeller powered by a 3HP motor, triple 4” dust ports for multiple hoses, and the TurboCone™ for improved chip separation and bag packing.

Using the PM1900 Dust Collector is easy. First, make sure it's properly plugged into a 230V power source. You can set the digital timer according to your needs, up to 99 minutes, and use the infrared sensor for remote control. Connect the hoses to the triple 4” dust ports if you need to attach multiple hoses at once. When it comes to safety, be aware that it has a Prop 65 warning about cancer and reproductive harm, so handle it with care. For maintenance, regularly check the canister filter for clogging. If it gets clogged, clean or replace it to keep the performance up. Also, check the all - metal duct for any blockages or damage. Since the clear collector bags have a large capacity, you don't need to change them too often, but when they're full, replace them promptly. Move the collector around easily using the four swivel casters and the handles, but make sure the area is clear to avoid any collisions.