The high-performance ASL 110V All-In-One grinder is a lightweight, single-head machine. It's perfect for grinding, polishing, and sanding various concrete floors, as well as stone and tile surfaces. Ideal for small to medium areas like garages, basements, and porches, this grinder is easy to handle. It can be quickly disassembled into two parts for hassle-free transportation. The included magnetic driver works well with diamonds, resin pads, and more. Since it's gear-driven, you won't need to change belts. It also comes with four 15 lb weights to increase head pressure. There's an optional water tank model for wet grinding. Specifications: Model - 110V All-in-One Grinder/Polisher/Sander; Voltage - 110V | 1 Phase; Current - 14A; Motor - 1.5 HP; Inverter - 1.5 HP; Disc Speed - 185 RPM; Frequency - 50/60 Hz.
Using this all-in-one grinder is a breeze. First, decide if you'll be doing dry or wet grinding. If it's wet grinding, you can use the optional water tank model. Attach the appropriate pad or tool to the magnetic driver, depending on the surface you're working on - diamonds for tough concrete, resin pads for a smoother finish. Place the weights on the machine to add pressure for better results. Start the machine and slowly move it across the surface in a smooth, even motion. When you're done, unplug the machine. After each use, clean the machine thoroughly. Wipe down the body and make sure to remove any debris from the disc and magnetic driver. Check the gear system regularly to ensure it's in good condition. If you notice any unusual noises or issues, stop using the machine and have it checked by a professional. Store the machine in a dry place when not in use to prevent damage.
