Clipper GC55 Compact Gas-Powered Push Walk-Behind Saw with Honda Engine
This Clipper GC55 saw is a great choice for various concrete cutting jobs. It has a compact and lightweight design, powered by a reliable Honda 5.5HP single-cylinder 4-cycle gasoline engine. Whether you're cutting green, cured, or decorative concrete, or working on expansion joints, this small push saw offers unbeatable performance. The low and wide frame, along with the front-mounted blade, ensures a more precise cut.
- Power Source: Single Cylinder 4 Cycle
- Engine Power: 5.5
- Propelling: Push
FEATURES & BENEFITS
- Equipped with a dependable Honda 5.5HP engine for top performance
- Front blade mount adds weight to keep the blade steady during cutting
- Fold-down design for easy storage and transportation
- Designed for multiple applications, from green to cured and decorative concrete
Engine power: 5.5
| MAX BLADE DIAMETER | MAX CUTTING DEPTH | ARBOR HOLE | BLADE FLANGE DIAMETER | ROTATION SPEED | MOTOR/ENGINE TYPE | SIDE OF CUT | POWER SOURCE | PART # |
|---|
| 10 In. | 4 In. | 5/8 In. | 3 In. | 3000 | Honda | Center | Gas | 70184630005 |
Using the Clipper GC55 saw is quite straightforward. First, make sure you have enough gas in the tank. Then, start the Honda engine following the normal procedures. Push the saw gently to guide it along the cutting line. When cutting, keep an eye on the blade and make sure it's cutting smoothly. As for safety, always wear proper safety gear like goggles and gloves. Don't operate the saw in wet or extremely windy conditions. For maintenance, after each use, clean the saw to remove any debris. Check the blade regularly for wear and tear and replace it if needed. Also, change the engine oil as recommended by the manufacturer to keep the engine running well.
