Description
The Metabo WEPB 24-180 MVT (606478420) 7-inch angle grinder is a top - notch tool designed for grinding and polishing concrete and stone. It comes in a cardboard box and is equipped with a mechanical disc brake. The Metabo long - life motor has patented dust protection, ensuring a long service life. With a mechanical disc brake and deadman switch, it offers the highest user safety. The disc stops in just 2.5 seconds after release, even during a power failure. The electronic safety shutdown of the motor reduces kickback when the disc stops unexpectedly, protecting the user. The rotating main handle and side handle can be mounted in 3 positions for an optimal grip, even while cutting. The tool - free adjustable guard is twist - proof. The starting current limitation with soft start prevents the fuse from tripping at startup. It also has electronic overload protection and restart protection. The Metabo VibraTech (MVT) integrated damping system and side handle reduce vibration, protecting the user. The safety switch prevents unintentional start, and the auto - stop carbon brushes protect the motor. There's an LED signal for triggered restart protection or overheating. Parameters include 15 AMPS, a 7 - inch grinding wheel, 8450 RPM no - load speed, 5800 RPM at rated load, 124 in - lbs torque, 5/8' - 11 UNC spindle thread, 13 lbs weight (without power cable), and a 13 - ft cable length. Vibration levels vary depending on the task, and noise emission details are also provided.
Using the Metabo WEPB 24 - 180 MVT angle grinder is easy. First, make sure you have the right grinding or polishing disc for concrete or stone. Adjust the main and side handles to a comfortable position so you can hold the grinder steadily. Then, switch it on. The soft - start feature will prevent the fuse from tripping. When you're done using it, release the switch, and the disc will stop within 2.5 seconds. Remember to pay attention to the LED signal. If it lights up, it might mean there's a restart protection trigger or overheating. For safety, always wear proper protective gear like goggles and gloves. Don't start the grinder accidentally; that's what the safety switch is for. As for maintenance, the motor has a long - life design with dust protection, but still, try to keep it clean. The auto - stop carbon brushes are there to protect the motor, but if they wear out, replace them. Also, check the grinding disc regularly for any signs of damage. Make sure the guard is always in place and adjusted correctly. If you follow these simple steps, your angle grinder will serve you well for a long time.
