Description
The Innovatech Terminator T3000XME is a 26' wide battery-powered ride-on floor scraper. It's designed for tough floor removal jobs like ceramic tile, kitchen vinyl, hardwood, and concrete floor scraping. With extremely high removal rates, zero emissions due to battery power, and a built - in quick - change swivel head design, it's a powerful tool. The compact and easy - to - maneuver design allows it to fit through standard doorways. The hydraulically adjusted blade can remove all types of flooring materials. It has a built - in swivel head and dual joystick operation for easy use. Benefits include a compact design for small spaces, quick - change battery packs, maintenance - free AGM battery packs, an optional tow - behind cart, an LED headlight, a built - in USB charging port, and zero emissions for indoor use. Technical specs: 48V - 230AH battery, up to 26' (66cm) working width, 55' (140cm) length, 29.5' (75cm) width, 47' (119CM) height, and 1850lbs (839kg) weight. Performance rates vary by material and job conditions, with carpet up to 2500 sq. ft. / hour, VCT/VAT up to 3000 sq. ft. / hour, sheet vinyl up to 2000 sq. ft. / hour, glue - down hardwood up to 1400 sq. ft. / hour, and elastomeric coatings up to 1800 sq. ft. / hour.
Using the Terminator T3000XME is easy. First, make sure the battery is fully charged. Slide the quick - change battery pack into the machine. Sit on the ride - on scraper and use the dual joysticks to maneuver it to the area where you need to remove the flooring. Adjust the hydraulically adjusted blade according to the type of flooring. Start the machine and begin scraping. For better visibility, turn on the LED headlight. When you need to change the battery, simply slide out the depleted one and slide in a new one. You can use the optional tow - behind cart to carry extra battery packs and accessories. As for maintenance, regularly check the battery level. The AGM battery packs are maintenance - free, but keep an eye on their performance. Clean the machine after each use to remove any debris. Check the blade for wear and tear and replace it if necessary. Also, make sure to operate the machine in a well - ventilated area, even though it has zero emissions, to ensure safety. And always follow the job - specific safety rules for floor removal.
