Indoor Roll Film for Secure Wall and Floor Sealing
- Versatile use on both walls and floors
- Strong adhesion to subsurface and tiles
- Suitable for chemical-resistant flooring
DURABASE WP is an ideal choice for sealing tiled walls and floors in moisture-prone areas. It adheres firmly to the subsurface and tiles, and is easy to install. When combined with epoxy resin adhesive and suitable tiles, it can create chemical-resistant flooring, which meets legal requirements in industries like food.
DURABASE WP
Polypropylene, yellow
Width: 100 cm
Roll sizes: 5, 10, 30 square meters
Accessories Sealing Tape
PP/PE
Width: 150 mm, Length: 5, 30 m
Width: 120 mm, Length: 5, 10, 30 m
Accessories Sealing tape TPE / backing fabric polyester
Width: 120 mm, Length: 5, 10, 50 m
Using DURABASE WP is quite straightforward. First, make sure the surface of the wall or floor is clean and dry. Then, roll out the DURABASE WP film over the area you want to seal, pressing it firmly to ensure good adhesion to the subsurface. If you're using it in combination with tiles, apply epoxy resin adhesive according to the instructions and then lay the tiles on top. When using the accessories like sealing tapes, measure the length you need and cut them accordingly. As for maintenance, just keep the sealed area clean. Avoid using harsh chemicals that might damage the film or the tape. If there's any dirt or stains, you can gently wipe them off with a mild cleaner and a soft cloth. That's all you need to know to get the most out of DURABASE WP.
