The PT4 Lifter Series - Power Tilter is a top - notch material handling equipment. It's perfect for moving stone, glass, metal, and other heavy, oddly - shaped materials. All of Wood's Vacuum Lifters are custom - made, with a typical lead time of 4 - 6 weeks. There are several models available. The PT410CAC, a special order, is an ideal curved - surfaces lifter for bulletproof windshields, with a 600 lbs [270 kg] capacity and AC power. The PT410TAIR is great for flat and textured surfaces, especially in stone shops, powered by air and also with a 600 lbs [270 kg] capacity. The PT410TAC and PT410TDCS, both special orders, are suitable for flat and textured surfaces in stone shops, with AC and DC power respectively, and 600 lbs [270 kg] capacity. The Powr - Grip Power Tilter 600, also available in DC and AC options, is excellent for production and fabrication settings. This economical vacuum lifter from Wood's Powr - Grip® comes with powered 90° tilt, sliding vacuum pad mounts, and individual vacuum pad shutoffs. It offers maximum versatility for handling high - density materials, even those with rough or irregular shapes. Key specifications include adjustable pad spread (length: min 33 - 1/2' [85 cm], max 86' [212 cm], width 19 - 3/4' [50 cm]), 4 / 10' [25 cm] diameter vacuum pads with replaceable sealing rings, a maximum load capacity of 600 lbs [270 kg], a lifter weight of 153 lbs [70 kg], standard operating power of compressed air at 8 SCFM [227 liters/min] @ 80 psi [552 kPa], apply/release times of 6 seconds / 3 seconds (approx), a 90° tilt time of 10 seconds (approx), continuous tilt duty, and many standard features like a multi - position lift shackle, vacuum gauge, etc. Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Click here for Dealer information.
Using the PT4 Lifter Series - Power Tilter is easy. First, make sure the power source (compressed air, AC, or DC depending on the model) is properly connected. Check the vacuum pads for any damage and ensure the sealing rings are in good condition. Adjust the pad spread according to the size of the material you're handling. When lifting, position the lifter over the material, activate the vacuum, and wait for the apply time (about 6 seconds). Once the material is securely held, you can use the powered 90° tilt function to move it as needed. For releasing the material, it takes about 3 seconds. As for maintenance, regularly check the vacuum gauge to ensure proper vacuum levels. Clean the vacuum line filter to prevent blockages. Replace the sealing rings on the vacuum pads when they show signs of wear. The tilt mechanism should be inspected for smooth operation. Remember, this product contains chemicals like lead that can be harmful, so always follow the safety warnings on www.P65Warnings.ca.gov.
