The EZ Click is a next-generation screw-based tile leveling system. It features an instant screw ejection leveling system. It supports tile thickness from 1/8' to 25/32' (3mm to 20 mm), and can level and space tiles at the same time. You can tighten it by hand without any tools. The minimum joint calibration is 3/64' (1 mm), making it ideal for both floor and wall tiling. It has a proprietary scratch-prevention edge and built-in spacer calibration of 5/64' (2mm), 1/8' (3mm) & 5/32' (4mm). The base screws are color-coded for easy size/type identification. The cap can be reused over 500 times, much more than others which may only be 8 to 10 times. It's also compatible with many older-generation systems. Its patent-pending design ensures adjacent tiles are perfectly level with zero effort. The cap's contact edge has a unique surface that removes residue and debris automatically, reducing the risk of scratching the tile finish. After cracking the bases, a special unlocking system ejects the screw instantly. Base screws come in multiple shapes for edge or angled installations and various calibration sizes for common joint sizes from 3/64' to 5/32'. Here are the details:
| Part No. | Size | Type | Color | Qty |
|---|
| EZCLICKCP | | Screw Cap | | 50 |
| EZCLB10WH | 3/64' (1.0mm) | Linear Joint Screw Base | White | 200 |
| EZCLB20YW | 5/64' (2.0mm) | Linear Joint Screw Base | Yellow | 200 |
| EZCLB30RD | 1/8' (3.0mm) | Linear Joint Screw Base | Red | 200 |
| EZCLB40BK | 5/32' (4.0mm) | Linear Joint Screw Base | Black | 200 |
| EZCXB20BL | 5/64' (2.0mm) | X Joint Screw Base | Blue | 200 |
| EZCXB30VI | 1/8' (3.0mm) | X Joint Screw Base | Violet | 200 |
| EZCXB40GY | 5/32' (4.0mm) | X Joint Screw Base | Gray | 200 |
| EZCTB20BR | 5/64' (2.0mm) | T Joint Screw Base | Brown | 200 |
| EZCTB30OR | 1/8' (3.0mm) | T Joint Screw Base | Orange | 200 |
| EZCTB40GR | 5/32' (4.0mm) | T Joint Screw Base | Green | 200 |
Using the EZ Click tile leveling system is easy. First, choose the right base screw according to the tile joint size you need. The color-coded base screws make it simple to pick the correct one. Place the base screw at the tile joint. Then, put the screw cap on and tighten it by hand - no tools required. This will level and space the tiles at the same time. When you're done with the tiling and want to remove the system, crack the bases. The special unlocking system will eject the screw instantly, so you don't have to unscrew the caps tediously. As for maintenance, keep the system clean after each use. You can reuse the cap over 500 times, but if it gets damaged, replace it. Also, make sure to store the system in a dry place to prevent rusting. Note that the system supports tile thickness from 1/8' to 25/32' (3mm to 20 mm), so don't use it with tiles outside this thickness range. And always check the joint calibration to ensure a proper fit.
