Alpha® proudly presents our second - generation Countertop Trim Kit. Ideal for those dealing with pre - fabricated countertops or needing custom stone trimming. This kit pairs the ESC - 125 Wet/Dry Stone Cutter with a carriage assembly and a 4' guide rail, enabling clean and straight cuts. All components are built with high - quality materials, easy to set up and operate. It's a must - have for slab cutting and trimming. Specifications: Model 5480 - 4150 (ESC - 125), 110 Volts, 11.2A, 1200W, 12,000 RPM no - load speed. The ESC - 125 weighs 8.9 lbs (4.0 kgs). Arbor is 7/8' (22.23mm), cutting disc diameter is 5' (125mm), max. cutting depth is 1 - 5/8' (41mm), with a 15ft (4.5m) single - phase cord and plug type A (110V). Kit includes 1 ESC - 125 Wet Stone Cutter, 1 5' Carriage Assembly (ASC - 5CSM), 1 Alpha® Eclipse II 5' (DEE005), 1 Guide Rail 4' (1.2m) (ASC - GR04), and 1 set of ESC - 125 Standard Accessories.
Using this Alpha Countertop Trim Kit is easy. First, assemble the ESC - 125 Wet Stone Cutter with the carriage assembly and attach the 4' guide rail. Make sure the cutter is properly connected to a 110 - volt power source. Before starting, check that all parts are secure. When cutting, hold the cutter firmly and follow the guide rail for a straight cut. Remember to wear safety goggles and gloves. For maintenance, after each use, clean the cutter and remove any debris. Store the kit in a dry place. If you notice any problems with the power or the cutting performance, stop using it immediately and check for loose connections or damaged parts.
