Pneumatic-Powered Mixing Drills

Ideal for use in hazardous environments, these pneumatic-powered mixing drills offer a safer solution for shipyards, oil and gas industries. With five air-powered models available, they can mix a wide range of materials such as paint, glue, epoxy, mortar, concrete, and refractory cement. You can use them around water without worrying about electric shock or blown circuitry. Here are the details of each model: Model 7 1111 0010 and 7 1112 0010 have a 110 lbs mixing capacity, 1.5 HP power, 49 CFM air consumption at 90 PSI, and a twist throttle type. Model 7 1113 0010 has a 200 lbs mixing capacity, 2.2 HP power, 67 CFM air consumption at 90 PSI, and also a twist throttle type. The suitable paddles vary for each model, and they all have an X ATEX classification.

Using these pneumatic - powered mixing drills is easy. First, connect the drill to an appropriate air supply according to the air connection size specified for your model (either 3/8' M or 3/4' M). Select the right paddle for the material you're mixing, like MG 140 for some models and others for different ones. Turn on the air supply and use the twist throttle to control the speed. When using around water, make sure all connections are secure to avoid any issues. Remember to regularly check the air consumption and adjust the air pressure if needed. After use, clean the drill and paddle thoroughly to keep them in good condition. Also, store the drill in a dry place to prevent any damage. If you notice any abnormal noises or performance issues, stop using the drill immediately and have it checked by a professional.