Tamping Rammer RAM65

The Menegotti Tamping Rammer RAM65 is a top - notch tool designed to save your time and reduce the workload. It's perfect for soils that need a high - impact compaction. This rammer can prevent settling and create a firm base for your projects. It offers enhanced comfort for the operator and comes with a 12 - month warranty. Technical specs include base dimensions of 11' x 12.5', a stroke of up to 680 p/min, runs on 4 - Stroke Gasoline with a consumption of 1.0 l/h and a tank capacity of 0.79 gal. It has a forward speed of 16 m - 50 ft/min, an impact force of 3,800 lbs, a compaction depth of up to 23.6 inches, and can cover up to 280 m2/3,000 sqft/h. Powered by a Honda GXR 120 - 4.0 HP engine.

Using the Menegotti Tamping Rammer RAM65 is quite straightforward. First, make sure the fuel tank is filled with the right type of gasoline, which is 4 - Stroke gasoline. Start the engine following the normal engine - starting procedures. When using it, move the rammer forward at a steady pace within the recommended forward speed of 16 m - 50 ft/min. This will help achieve the best compaction results. As for the compaction area, try to cover the ground evenly to get a uniform firm base. Now, some important notes. Always wear proper safety gear like safety shoes and goggles when operating the rammer. Don't use it on surfaces that are not suitable for soil compaction. Also, don't let the engine run out of fuel suddenly, as it can damage the engine. For maintenance, check the fuel level regularly. After each use, clean the base and the body of the rammer to prevent dirt and debris from building up. Every few uses, check the engine oil level and change it as per the engine manufacturer's recommendations. Keep the rammer in a dry and safe place when not in use.