The TS2000 is an outstanding two-engine HEPA concrete dust extractor. Its two commercial-grade Ametek motors deliver 258 cfm and 100 inches of water lift. You can control the motors separately to meet different power needs. It features a classic jet pulse filter cleaning system. When you notice a drop in suction, simply purge the pre - filter for 3 - 5 seconds by blocking the vacuum inlet. There's no need to open the machine and remove the filters, preventing secondary dust hazards. This dust extractor is equipped with a two - stage filtration system. The conical main filter is the first stage, and two H13 filters are the final stage. Each HEPA filter is individually tested and certified with a minimum efficiency of 99.99% @ 0.3 microns, meeting the new silica requirements. It's perfect for collecting dust from building, grinding, plastering, and concrete work. Additionally, the TS2000 offers an optional height adjustment function. It can be lowered to less than 1.2m, making it very convenient to transport in a van.
Using the TS2000 dust extractor is easy. First, make sure it's plugged in properly. You can control the two motors separately depending on how much power you need. When you start to feel that the suction isn't as strong as before, don't worry. Just block the vacuum inlet and let the jet pulse system purge the pre - filter for 3 - 5 seconds. This will keep the suction power high. For transporting, if you have a van, you can use the optional height adjustment function to lower it to less than 1.2m. As for maintenance, check the filters regularly. Although they are highly efficient, over time, they may get clogged. But you don't need to open the machine to clean the pre - filter. Just follow the jet pulse cleaning method. Also, make sure to keep the machine in a dry place when not in use to prevent any damage.
