Description
Tenax Buff Flowing is a top - notch polyester mastic. It's perfect for horizontally repairing, rebuilding, gluing, and filling marble and quartz surfaces. Besides the buff color, Transparent, White, and Titanium options are also available. You can mix it with pigment to match the stone color. It's a super crystal - clear glue. After curing, it becomes shiny and is highly polishable. This glue is recommended for interior use and isn't suitable for temperatures below 32°F. Special color requests can be accommodated. For the best results, ensure the surface is dry, clean, and dust - free. If you're adding color, mix the coloring paste with the resin before adding the catalyst, and be careful not to use too much. The resin - to - catalyst mixing ratio is 100:2 - 3. Stir well and apply. Don't put unused product back in the can and seal it tightly after use. Keep it away from heat, humidity, and sun. It lasts at least 6 months when stored between 65°F - 77°F. Read the safety data sheet before use. Gel time at 77º is 3 - 4 min, tacky - free time is 15 - 25 min, and working time is 60 - 80 min. The usable temperature range after hardening is 32º to 230º. The ratio of glue to hardener is 100/2 - 3% by weight. Call 561 - 833 - 8992 for larger sizes. There are Flowing SDS Report, Knifegrade SDS Report, and TDS Report available.
Hey there! Using this Tenax Buff Polyester Glue is a breeze. First, make sure the surface you're working on is dry, clean, and free of dust. If you want to color the glue, add the coloring paste to the resin before you mix it with the catalyst. Just be careful not to use too much coloring paste, or it might affect the final product. The right ratio of resin to catalyst is 100:2 - 3. Stir it really well and then apply it. Don't put any unused glue back in the can, and always seal it tightly after you're done. This glue is great for interior use on marble and quartz surfaces, but it won't work well in temperatures below 32°F. Store it in a cool place, away from heat, humidity, and the sun. If you keep it between 65°F - 77°F, it'll last at least 6 months. Before you start using it, read the safety data sheet. At 77º, the gel time is 3 - 4 minutes, it'll be tack - free in 15 - 25 minutes, and you have 60 - 80 minutes of working time. After it hardens, you can use it in temperatures from 32º to 230º. If you need a larger size, just call 561 - 833 - 8992.
