The Aardwolf Compact 12V Swiftlift is an innovative vacuum lifter crafted for unloading cut workpieces from bridge saw tables. It enables the operator to pick up workpieces horizontally, effortlessly shift the load to a vertical position, and place it on a transport frame. Powered by a clip - in 12V battery with an energy - saving system, you can work all day without recharging, and the battery can be swapped in seconds. Key features include a high - performance vacuum pump for generating vacuum, both audio and visual alarms for safety, and a foam vacuum gasket suitable for smooth, flamed, and bush - hammered surfaces. The working load limit can reach a maximum of 380 Kgs, depending on the vacuum pad dimensions. Specifications are available in both metric and imperial units. It comes with 2 batteries, 1 battery charger, and 2 large vacuum pads (520 x 320) & (400 x 200).
Using the Aardwolf Compact 12V Swiftlift is easy. First, make sure the 12V clip - in battery is fully charged or installed. Then, position the lifter over the workpiece on the bridge saw table horizontally. Activate the vacuum pump to pick up the workpiece. You can then change the position of the load to vertical and place it on the transport frame. When it comes to safety, pay attention to the audio and visual alarms. If you hear or see an alarm, it might indicate a problem with the vacuum. For maintenance, regularly check the foam vacuum gasket for wear and tear. Replace it if it's damaged. Also, keep the battery charged. When not in use, store the lifter in a dry place. And don't forget, the working load limit is max 380 Kgs, so never exceed this limit to ensure safe operation.
