Description
All Shield WB is a remarkable low-VOC, waterborne, synthetic-modified silane-siloxane concrete protector. It forms a clear, penetrating, and breathable layer that defends against oil, water, food stains, and various liquid contaminants. Suitable for both indoor and outdoor horizontal and vertical surfaces, it creates a durable shield against moisture, staining, and deicing salts.
This product offers excellent repellence, especially against motor oil and de-icing salts. With its low VOC formulation, it complies with OTC, LADCO, and SCAQMD regulations. It reduces water penetration, minimizing freeze-thaw damage and weathering. It provides long-lasting protection for new and existing concrete and stone surfaces. It dries quickly, leaving a tack-free and skid-resistant finish. It's a water-based, colorless, and non-yellowing solution, and it's USDA approved for indirect food contact areas.
All Shield WB is great for protecting commercial and industrial floors, automotive service areas, pavements, driveways, brick, concrete pavers, parking structures, bridges, and marine platforms. To apply, use a low-pressure sprayer, follow safety measures like using a respirator and ensuring ventilation. Coverage depends on surface porosity. For new concrete, make sure it's dry and cured for at least 21 days. Keep the substrate clean and free of moisture, oil, and contaminants. Agitate well before each use.
It comes in 55-gallon drums, 5-gallon pails, and 1-gallon jugs (4 per case). Its technical specs include a modified fluoropolymer and silane/siloxane blend, a flash point greater than 200°F, a 12-month shelf life, a water-clear appearance, and excellent UV resistance.
Clean spills and contaminants right away. Use clean water or a pressure washer for regular cleaning. For tough stains, use a diluted solution of SpecChem Orange Peel or Berry Clean and rinse thoroughly. You may need to reapply after extensive cleaning.
Hey there! Here's how to use All Shield WB. First, make sure you've got a low - pressure sprayer. When you're applying it, don't forget to wear a respirator and work in a well - ventilated area. The amount you'll need to cover a surface depends on how porous it is. If you're using it on new concrete, wait at least 21 days for it to dry and cure properly. And always clean the surface before application, getting rid of any moisture, oil, or other gunk. Also, give the product a good stir before you start using it each time.
Some important notes: This product has a low VOC formula, which is great for the environment and meets some important regulations. It dries fast and leaves a finish that won't be sticky and is skid - resistant, so it's safe to walk on.
For maintenance, clean up spills and contaminants as soon as you see them. You can use clean water or a pressure washer for regular cleaning. If there are tough stains, use a diluted solution of SpecChem Orange Peel or Berry Clean, then rinse well. After a big cleaning, you might want to reapply All Shield WB to keep the protection going strong. It comes in different sizes like 55 - gallon drums, 5 - gallon pails, and 1 - gallon jugs, so you can pick what suits your project best.
