Anchor Brand White PTFE Thread Sealant Tapes

This white PTFE thread sealant tape, measuring 1 inch in width and 1296 inches in length, is a versatile solution. It can be used in a wide range of applications, from common services like water and air to challenging ones such as acids and pure oxygen. Installation is a breeze - just wrap it around the male threads a few times. Made of 100% PTFE, it's compatible with almost all process fluids, except molten alkalis and elemental fluorine. It has an unlimited shelf life, won't age or harden. Specifications: Applications include acids, air, pure oxygen, and water. Brand is ANCHOR BRAND. Color is white. Originated from the US. It's non - hazmat. Stock is available. Max temperature range is 500°F and min is - 450°F. Nominal thickness is 0.0035 inches and width is 1 inch. It's in the MPI Catalog on page 93 in 2021 and Prop 65 compliant.

Using this PTFE thread sealant tape is easy. First, make sure the male threads are clean and dry. Then, start wrapping the tape around the threads in a clockwise direction. Do a few wraps to ensure a good seal. You're done once you've covered the threads properly. As for precautions, avoid using it with molten alkalis and elemental fluorine as it's not compatible. When it comes to storage, keep it in a cool and dry place. There's no need to worry about it going bad because it has an unlimited shelf life and won't harden over time. If you need to remove the tape, just peel it off gently.