Epoxy 100 is a two - component, water - based epoxy system. It's a breeze to apply, has a low odor, and offers outstanding coating performance.
This material cures perfectly without blush across a wide temperature range. It sticks like glue to various surfaces, especially damp or wet concrete. Thanks to its moisture - loving nature and strong alkalinity resistance, Epoxy 100 can be used on green concrete after proper surface prep. It works great as a general - purpose coating for concrete floors and as a primer for epoxy, polyurethane, and acrylic materials. With a 30 - year success history as a concrete coating, it's ideal for warehouses, factory floors, automotive repair shops, residential garage floors, and other commercial or industrial maintenance jobs.
Features
- Low - odor water - based epoxy system
- Blush - free curing at different temperatures
- Super adhesion to damp or wet concrete
- Resistant to moisture and alkalinity
- Can be used on green concrete
- Functions as a primer for epoxy, polyurethane, and acrylic coatings
Specifications
| Attribute | Details |
|---|
| Colors & Finishes | 14 Standard Colors, Clear, Satin Finish, Gloss |
| Kit Size | 5 Gallons (4 GL Part A, 1 GL Part B) |
Supporting Documents
- Safety Data Sheet
- Standard Color Card
To use Epoxy 100, first, make sure the surface, especially if it's green concrete, is properly prepared. Mix Part A and Part B of the 5 - gallon kit as instructed. Apply it evenly on the surface, whether it's a warehouse floor or a residential garage floor. When using it as a primer, follow up with the appropriate epoxy, polyurethane, or acrylic material. Note that although it can cure in various temperatures, avoid extremely cold or hot conditions for best results. Also, always refer to the Safety Data Sheet for handling and safety information. For maintenance, keep the coated surface clean. If there are any scratches or damages, you can consider reapplying the epoxy as needed.
