This unique forklift snow plow attachment has a special design that attaches easily to the forks. It passes through fork tubes, shifting the weight back towards the forklift mast. Safety is ensured by locking pins that secure the snow plow to the forks. The manual pivot mechanism allows for angled plowing on both sides. Floating pads enable easy adjustment of the plowing height, and adjustable springs let the blade pivot back for safety. It's made of steel with a baked - in powder coat finish, adding extra toughness. The SPB - P - 72 model has a box depth of 11 - 9/16 inches. All measurements of this forklift snow pusher are approximate, and slight variations may occur. The weights shown are approximate shipping weights. Available models include the SPB - N - 72 with a 72 - inch wide blade (weighing 619 lbs) and the SPB - P - 72 push box with a 72 - inch wide blade (weighing 653 lbs).
Using this forklift snow plow is easy. First, attach it to the forks of your forklift and secure it with the locking pins. You can then use the manual pivot mechanism to angle the plow for different snow - clearing needs. Adjust the plowing height with the floating pads as per the snow depth. When you hit an obstacle, the adjustable springs will let the blade pivot back, protecting the plow and your forklift. As for maintenance, regularly check the locking pins and the pivot mechanism for any signs of wear. Keep the steel surface clean to prevent rust, especially after use in wet snow conditions. Also, make sure to note that all measurements are approximate, so expect some slight variations. And the weights shown are just for shipping, so don't be alarmed if there are minor differences in the actual weight.
