The JET Variable Speed Mitering Bandsaw is a compact powerhouse. It comes with a newly designed motor and a 3 - step gear transmission, delivering outstanding torque. The heavy - duty casted head can swivel for 45° and 60° cuts, enabling precise cuts without moving the material. It's CSA/CUS Certified. The front legs have leveling pads, and it features fully adjustable ball - bearing blade guides. With a hardened ferrous 82 - 130 SFPM, you can change speeds quickly by turning a dial, no more belt changes. The variable speed allows you to cut different materials easily. It also has standard wheels for easy movement in your shop. More details like stock number, amperage, and dimensions are available in the table below.
Using this JET bandsaw is easy. First, make sure it's properly plugged into a 115V power source. Adjust the speed according to the material you're cutting by simply turning the dial. Position your material and use the vise, which can swivel from 0 to 60 degrees, to hold it in place. Then, start the saw and make your cut. When making angled cuts, use the swiveling casted head to set the desired angle. As for maintenance, regularly check the blade for wear and tear. If it's dull or damaged, replace it with a blade of the correct size (1/2 x.025 x 64 - 1/2 inches). Keep the blade guides clean and adjust them as needed for smooth operation. Also, check the leveling pads on the front legs to ensure the saw is stable. Be aware that this product can cause cancer and reproductive harm, so always wear appropriate protective gear when using it.
