Eterra's Mix and Go Concrete Mixers are a game - changer. With the ability to scoop up material, mix it whether on the move or stationary, and dispense it in three different ways, they simplify concrete mixing jobs. The Mix & Go 600, the largest in the line, holds 21 cubic feet and is perfect for serious concrete projects. It's available in other sizes like the 450, 250, and Mini 100. These mixers feature an enclosed chain - driven system, a hydraulically operated center chute with a dispenser hose for easy and precise concrete dispensing. An easy - to - lift grate simplifies cleaning, and an integrated bag splitter eases the loading process. The Mix & Go 600 Cement Mixer is powered by a reversible chain drive transmission system that uses your machine's hydraulics for both mixing and dispensing. You can dispense material via the manual side chute or the bottom chute with a dispensing hose operated by a 12V solenoid. Constructed of A572 Grade 50 steel, it has extremely durable Hardox 400 mixing paddles. The enclosed drive system is protected from the elements, and a bolt - on attachment plate allows adaptation to other machines like telehandlers if needed. Features include an empty weight of 1389 lbs, a full - load weight of 4564 lbs, a flow range of 11 - 22 GPM, a capacity of 158.5 gallons (21.18 cubic feet), a max pressure of 3500 PSI, and a width of 81 inches. Design specs are a chain drive system, Hardox 400 paddle material, an 8 - inch diameter hydraulically operated center discharge chute, a manual lever side discharge chute, and a 12V switched solenoid electrical system.
Using the Mix & Go 600 Concrete Mixer is easy. First, use the integrated bag splitter to load the concrete material into the mixer. Once loaded, start the machine and use its hydraulics to power the reversible chain drive transmission system for mixing. You can mix the material while the machine is moving or stationary. When it's time to dispense the concrete, you have two options. You can use the manual side chute or the bottom chute with the dispensing hose, which is operated by a 12V solenoid. Just make sure your machine's flow range is between 11 - 22 GPM and the pressure doesn't exceed 3500 PSI. As for maintenance, after each use, lift the easy - to - lift grate and clean the mixer thoroughly. Keep the enclosed drive system protected from dirt and moisture as it's exposed to the elements during operation. If you need to use the mixer with other machines like telehandlers, you can easily attach it using the bolt - on attachment plate.
