Permanently safeguard tile surfaces from streaks and stains caused by efflorescence.
- Stop mineral deposits from reaching the material surface through the substrate and sides.
- Specifically formulated for natural stone, terracotta, and absorbent materials.
- Perfect for floors, stairs, and wall coverings.
Features & Specifications
- Eco-Friendly: Water-Based and VOC-Free.
- Apply to the back and sides of natural stone, granite, marble, agglomerates, terracotta, and absorbent tiles and slabs before installation.
- Doesn't form a film and allows material to breathe (water vapor escapes for proper drying and curing of setting materials).
- Meets UNI EN 1348-2009 and ASTM C482-02 R-2009 bonding standards.
IDEAL FOR
NATURAL STONE, GRANITE, MARBLE, AGGLOMERATES, TERRACOTTA, AND ABSORBENT MATERIALS
HOW TO USE IT
It's ready to use, no dilution needed. Clean the back and sides of the tile or slab well, getting rid of dust and residue.
Use a large flat paintbrush, cloth, or airless sprayer to apply an even coat on a dry surface. Let it dry for about 24 hours before installing. Warning: Don't apply it to the front of the tile or slab. The product won't affect the adhesive's bonding properties (regulation UNI EN 1348-2009 and ASTM C 482-02). Expert advice: For proper post-installation cleaning, wash the surface with a suitable cleaner according to the material's characteristics (CLEAN ALL, STONE CLEAN, PS87, DETERDEK).
PLEASE NOTE: Don't apply PW10 on polished surfaces.
Literature & Links
Technical Sheet
Safety Sheet
Using the PW10 Anti-Contaminant Back Sealer is easy. First, it's ready to use right out of the container, so no need to dilute it. Make sure to thoroughly clean the back and sides of the tile or slab to remove any dust or residue. Then, use a large flat paintbrush, a cloth, or an airless sprayer to apply an even coat of the sealer on a dry surface. Let it dry for about 24 hours before you install the tile. Remember, don't apply it to the front of the tile or slab. This sealer won't affect the bonding of the adhesive, as it meets certain standards. After installation, for proper cleaning, use a cleaner that suits the material, like CLEAN ALL, STONE CLEAN, PS87, or DETERDEK. And one important thing to note: don't use this sealer on polished surfaces.
