10 Hand Cup w/ Mounting Plate

This 10-inch hand cup with a mounting plate offers a reliable and temporary mounting solution for equipment. It won't mark or damage most surfaces, but isn't suitable for thin or fragile materials. It features 1/4-20 and 3/8-16 threaded holes. Key benefits include no need for drilling when mounting equipment, a red-line indicator to warn of significant vacuum loss, and high capacity. Ideal for mounting equipment on smooth, nonporous surfaces. Model: N6000NBP, SKU: 91764. Mounting platform height (excluding stud) is 4-5/32 inches [11 cm]. Allows for flat or curved surfaces with a minimum radius of 13 inches [330 mm]. Minimum material thickness is 1/4 inch [6.35 mm]. Works in a temperature range of 10°F [-12°C] to 120°F [49°C]. Pad diameter is 10 inches [25 cm], pad model is G0750, and rubber type is standard. California Residents: WARNING Cancer and/or Reproductive Harm - www.p65Warnings.ca.gov

Using this hand cup is easy. First, make sure the surface you're mounting on is smooth and nonporous, and at least 1/4 inch thick. Place the hand cup on the surface and connect your equipment to the 1/4 - 20 or 3/8 - 16 threaded holes. Keep an eye on the red - line indicator; if it shows a significant vacuum loss, check the connection. When it comes to temperature, use it in an environment between 10°F [-12°C] and 120°F [49°C]. Don't use it on thin or fragile materials. For maintenance, regularly clean the pad and check for any signs of wear on the rubber. If you're a California resident, be aware of the cancer and reproductive harm warning.