Description
The Weha 3-Step Hybrid Diamond Polishing Pad Set of 3 is a game-changer. These 3mm thick pads are super flexible and can be used wet or dry on granite and marble, but only wet on engineered stone. With a max RPM of 4500, they offer outstanding performance. The technology behind these pads is a real advancement, changing the fabrication process. In the past, 7-step pads were the go-to for a deep polish, then 5-step pads came along. But the Weha 3-step pads are different. They can achieve a high-quality polish on both light and dark stones, including Black Absolute, Baltic Brown, and various Silestone colors. They also work great for dry polishing marble and granite. However, don't use them on quartz materials as the heat can damage the resin. These pads are made with the best diamonds, materials, and resins, offering a deep, fast polish at a competitive price. They provide a better finish than traditional 7-step pads, increase shop production by 40%-60%, and allow you to use one pad for multiple stone types. For fabricators, they mean less worry about quality, higher production, easier purchasing, and lower costs per linear foot. Just be careful who you let test them; hourly workers may not like them as they speed up the process.
How to use: For granite and marble, you can use these pads either wet or dry. For engineered stone, use them wet only. Simply attach the pad to your polishing machine and start working on the stone surface. Remember to keep the RPM below 4500. Note: Don't use these pads on quartz materials because the heat generated during polishing can burn the resin in the quartz. Also, if you're letting someone test the pads, it's better to choose those paid by production or subcontracting as hourly workers might not like the increased speed. Maintenance: After use, clean the pads thoroughly to remove any debris. Store them in a dry place to keep them in good condition. Over time, check the pads for wear and replace them when they start to lose their effectiveness.
