Explore our range of Bartell hand - held drills and related accessories. The compact drill stand for hand - held core drills features a magnesium column, a replaceable steel rack, and polymer guides. It has a dual - side raise/lower mechanism, a 60mm replaceable collar, and dual doughnut holders. Adjustable leveling screws make it easy to set up, and it can be used with HCD2200 or DMC6D drills.
The 'THE MONGOOSE DRILL' can drill up to 6' diameter mongoose bits and 3' diameter wet bits. It comes with an adjustable length shoulder stock, a locking trigger, and a slip clutch for operator safety. The 16' - 14 gauge SJT cord, molded carry case, water feed with shutoff, and 18mm thread w/ adapters add to its functionality.
A heavy - duty drill offers wet and dry drilling capabilities. Its magnesium alloy construction provides minimal weight and maximum strength. With improved cooling, a soft - start electric motor, current and thermal overload protection, and a load warning system, it's reliable on the job site. It can be mounted to a rig and has a two - in - one spindle for different thread types.
The full - size combination stand can handle up to a 14' bit and includes a stand, vacuum pump, switch box, and spacer block. Technical specs are available for each product to help you make an informed choice.
Using Your Bartell Hand - Held Drills and Accessories
**Using the Drill Stand**: First, find a flat surface and use the adjustable leveling screws to stabilize the stand. Attach your HCD2200 or DMC6D drill to the stand. You can use the dual - side raise/lower mechanism to adjust the drill's height. Remember to check the replaceable steel rack and polymer guides regularly for wear.
**Using 'THE MONGOOSE DRILL'**: Adjust the length of the shoulder stock to your comfort. When drilling, use the locking trigger for continuous operation. The slip clutch is there to protect you, so don't try to override it. Connect the water feed when using wet bits and use the shutoff valve as needed.
**Using the Heavy - Duty Drill**: Before starting, make sure the power supply matches the drill's voltage requirements. For wet or dry drilling, select the appropriate bit. If you're using it on a rig, follow the mounting instructions carefully. The anti - vibration side handle can reduce your stress during long - term use.
**Using the Full - Size Combination Stand**: Install the stand on a sturdy base. Attach the motor (choose from Milwaukee 4094 or 4096). Connect the vacuum pump and switch box. Make sure the bit diameter doesn't exceed 14'.
**Maintenance**: Clean your drills and accessories after each use. Lubricate moving parts regularly. Check cords for damage. Store drills in their cases to protect them from dust and moisture. If you notice any technical issues, refer to the technical specs or contact customer support.
