The CC150XL-EE First-Cut Saw is part of the True Early Entry™ First-Cut product line. It features a 6' blade capacity and is gasoline powered. With a maximum cutting depth of 1-3/16', it has a reliable skid plate system for green concrete. Despite its heavy-duty design, it's light enough for two people to lift. The cyclone air filter increases air flow, and the up-cut design keeps debris out of the cut. It also has a blade raise/lower mechanism with spring-loaded release and a single ribbed drive belt. Specifications include a blade shaft RPM of 2,600, a 1-1/4' blade shaft diameter, a 1' arbor size, adjustable handle bars, and a standard depth indicator. There are three engine options: 6.5 HP Briggs® Vanguard, 6.5 HP Lifan® LF168F, and 4.8 HP, 7.6 torque (lbs.-ft.) Honda® GX160.
Using the CC150XL-EE First-Cut Saw is easy. First, choose the right engine according to your needs from the three available options. Start the engine following the manufacturer's instructions for that specific engine. Adjust the handle bars to a comfortable position for you. You can use the depth indicator to set the desired cutting depth before starting to cut. When cutting, make sure the saw is stable and move it steadily through the material. As for maintenance, regularly check the air filter, especially the cyclone air filter, to ensure good air flow. Keep an eye on the single ribbed drive belt for any signs of wear and replace it if necessary. After each use, clean the saw to remove any debris. And always follow the safety instructions in the operating manual to avoid any accidents.
