Description
The Frankfurt Airflex 300 Grit Brush by Tenax is a great tool for stone fabrications. It can be used with common tools in fabrication shops. This brush effectively removes the'softer' material in the stone, enhancing the natural color and creating a beautiful texture. The Tenax Filiflex series, available in 36, 46, and 60 grit, has many narrow bristles that aggressively remove material and cut deep for an antique look. The Tenax Airflex, starting from 120 grit, adds color and gives a soft antique finish. To achieve a typical antique finish, start with Filiflex 36, 46, and 60 grit, then finish with Airflex 120, 220, 300, and 400 grit. Higher grits can create a polished finish.
Using the Frankfurt Airflex 300 Grit Brush is easy. First, make sure you have a compatible tool in your fabrication shop. For a typical antique finish on the stone, start with the Tenax Filiflex in 36, 46, and 60 grit to aggressively remove material and cut deep. Then, switch to the Airflex brushes. Begin with 120 grit, then move to 220, 300, and finally 400 grit. If you want a polished finish, you can use higher - grit brushes. When using the brush, keep it moving evenly on the stone surface to get an even finish. After use, clean the brush thoroughly to remove any stone debris. Store it in a dry place to prevent damage to the bristles.
