Description
The MAG 50 (600636620) Magnetic Core Drill is a top - notch tool designed for working on vertical surfaces and overhead. It has a large stroke, making it perfect for using core drills, spiral drills, and countersinks. The magnetic base offers high holding power, enabling stable operation in difficult positions. It features a Metabo long - life motor with patented dust protection, ensuring a long service life. The Vario - Tacho - Constamatic (VTC) full - wave electronics allow you to customize the working speed according to the application material, and the speed remains almost constant even under load. It has a clockwise/counter - clockwise rotation with a thread cutter. The durable two - speed gearbox with oil bath lubrication helps you select the ideal speed. An integrated coolant container provides easy - to - dose internal cooling from the core drill. A bright LED light makes alignment easy in poor light. The chip protection guard can be fixed without tools, protecting you from metal shavings and tool contact. A protective circuit starts the motor only when the magnet is activated. It also has overload protection to prevent motor overheating and restart protection to avoid unintentional start - up after a power interruption. The lockable slide makes tool changes comfortable, and the handle allows for easy carrying and lifting. The sturdy 16 - foot electric cord has rubber sheathing. Note that the machine shown may vary in equipment and technical details based on the configuration. Pay attention to the delivery scope and product description, and accessories are included only if listed in the delivery scope. Parameters: Rated input power is 1200 W, 11.9 AMPS, output power is 620 W. Max. drill - Ø with core drill is 2 inches, with spiral drill is 3/4 inches. Maximum drilling depth is 2 inches, thread cutting is M 16. No - load speed is 100 - 250 / 200 - 450 RPM, revolutions at rated load are 250 / 450 RPM. Bit retainer is Morse taper MK 2 / Weldon shaft 19 mm (3/4 inches). Weight is 28 lbs, cable length is 16 ft, torque is 797 / 443 in - lbs. Max. depth of feed is 6 5/16 inches, max. magnetic holding force is 12250 N. Dimensions of the magnet base are 3 9/16 x 7 1/2 inches. Height of slide bottom setting is 18 inches, height of slide top setting is 24 inches. Vibration when drilling in metal is 2.5 m/s² with an uncertainty of measurement K of 1.5 m/s². Noise emission: sound pressure level is 79 dB(A), sound power level (LwA) is 92 dB(A) with an uncertainty of measurement K of 3 dB(A).
Using the MAG 50 Magnetic Core Drill is easy. First, make sure the magnet is activated before starting the motor, thanks to the protective circuit. This is important for your safety. When you're ready to drill, choose the right drill bit according to your needs, whether it's a core drill, spiral drill, or countersink. Adjust the speed using the Vario - Tacho - Constamatic (VTC) full - wave electronics to match the material you're working on. You can rotate the drill clockwise or counter - clockwise when using the thread cutter. Remember to use the integrated coolant container to keep the drill bit cool during operation. The LED light will help you align the drill in low - light areas. When you need to change the tool, use the lockable slide for a comfortable experience. For carrying, use the handle provided. As for maintenance, keep the motor clean thanks to its dust - protection feature. Check the oil in the two - speed gearbox regularly to ensure smooth operation. After use, always check for any metal shavings on the chip protection guard and clean it if necessary. Also, make sure to store the drill in a dry place. Be aware that the machine may vary in configuration, so always refer to the delivery scope and product description. And don't forget, accessories are only included if they're listed in the delivery scope.
