HD1 HEPA Dust Collector

The HD1 HEPA dust collector by Innotech and Bartell Global features a two - stage filtering system. It has a main conical filter and a HEPA filter for high - level dust extraction. The'reverse - air' jet - pulse filter cleaning system effectively removes dust build - up. The easy - to - use 'Inlet closure door' saves you the hassle of removing hoses during cleaning. It easily connects to hand - operated power tools to extract concrete dust while cutting and grinding. Also, it comes with a 'Continuous Bag' disposal system for efficient dust collection. Technical specs include 120v, 50mm inlet, 1.6 HP power, 8 amps, 120 cfm air flow, 100 inches water lift, a 16 ft2 pre - filter (f8) with >99.5% @1.0um efficiency, a 13 ft2 HEPA filter (H13) with >99.99% @0.3um efficiency, dimensions of 24.7' x 16.5' x 40.2', and a weight of 88lbs.

Using the HD1 HEPA dust collector is easy. First, connect it to your hand - operated power tools like those used for cutting and grinding concrete. The connection is straightforward, and it'll start extracting dust right away. When it's time to clean the filters, you don't need to remove the hoses thanks to the 'Inlet closure door'. Just activate the'reverse - air' jet - pulse filter cleaning system, and it'll remove the dust build - up. As for maintenance, regularly check the 'Continuous Bag' disposal system and empty it when it's full. Also, keep an eye on the pre - filter and HEPA filter. Replace them when their efficiency drops. And make sure to place the dust collector on a stable surface. Always operate it within the specified voltage of 120v to avoid any electrical issues.