Manual & Electric Stackers (Pramac)

These stackers feature electric power for drive and lift, and an ergonomic handle with a comprehensive control and safety system. They have a 'Tortoise' push - button for slow motion, a safety punch button with a warning buzzer, and an on - board battery charger. Powered by two 12V DC batteries. The PMC - VHPS - 2000 - AA model offers adjustable forks for easy alignment, manual lift for precise load positioning, two upright handles for quick maneuvering, and a wide service range for various settings. All measurements are approximate, and slight variations may occur. Shipping weights shown are approximate. There are different models with fixed forks for skids and manual hand pump stackers, each with specific fork sizes, service ranges, and load capacities.

Using your Pramac stacker is straightforward. First, make sure the battery is fully charged if you're using the electric mode. When using the 'Tortoise' button, it's great for moving in tight spaces where slow and careful movement is needed. To lift a load, use the manual lift for precise positioning, or rely on the electric power for heavier or larger loads. When operating, always keep an eye on the safety punch button and listen for the warning buzzer. It's there to keep you safe. For maintenance, regularly check the battery level and charge it as needed. Also, look at the forks for any signs of wear and tear, and make sure the alignment is correct. Keep in mind that all the measurements and weights given are approximate, so there might be some minor differences. And always follow the weight capacity limits for each model to avoid any damage to the stacker and ensure safe operation.