Description
Introducing the Gorilla GCT-8-Series III Joint Saw from Diamond Tool Store. It offers an option for a propane kit accessory. This saw is setting a new standard for dustless early entry concrete saws. With outstanding dust control and operator convenience in mind, it's a top - notch choice. Standard features include a quick - change skid plate and a 7 - position control handle. Powered by a Honda GX200 engine, it effortlessly turns an 8 - inch blade to the maximum depth. Adjusting the cutting depth is a breeze. Just loosen the thumb knob and slide the stop to your preferred depth. The lifting and lowering mechanism lets you operate the blade in seconds. The unique blade housing with a large 2 - inch dust port enables almost dustless concrete cutting. The self - leveling quick - change skid plate in the blade housing can be easily swapped or cleaned in no time. A heavy - duty front and rear pointer helps you follow the cutting line accurately. The 3/8 - inch heavy - duty steel frame reduces vibrations, ensures smoother cuts, and guarantees long - term reliability. For added convenience, the optional all - terrain wheel kit eliminates the need to carry the saw through construction areas. Made in the USA. Key features are excellent dust control, a green concrete skid plate, 7 - position control handles, up - cut blade rotation, quick blade depth adjustment, an integrated wrench holder, heavy - duty bearings, wide wheels for stability, and front and rear blade pointers. Specifications include a 5.5 HP Honda GX200 engine, a maximum cutting depth of 2 inches, 7 handle positions, a maximum blade size of 8 inches, an arbor size of 7/8 inches, 2 drive belts, a weight of 125 lbs., and a minimum vacuum requirement of 250 CFM. If you need a larger joint saw, try the GCT - 10X Series with 10, 12, and 14 - inch blade capacities. For a smaller saw or crack chaser, consider the Gorilla 4.5 Grab and Go Dustless Crack Chaser Saw. There are also GCT8 Owners Manual and GCT8 EE Owners Manual available.
Using the Gorilla GCT - 8 - Series III Joint Saw is easy. First, make sure the saw is on a stable surface. Start the Honda GX200 engine as you would with a regular engine. Adjust the cutting depth by loosening the thumb knob and sliding the stop to your desired depth. Then, you can start cutting. When cutting, use the front and rear pointers to follow the cutting line accurately. To lift or lower the blade, use the lifting and lowering mechanism. This will help you control the cutting process easily. As for maintenance, keep the blade housing clean. You can easily swap or clean the self - leveling quick - change skid plate in seconds. Check the drive belts regularly and replace them if they show signs of wear. Also, make sure the vacuum is working properly as a minimum of 250 CFM is required for good dust control. When not in use, store the saw in a dry place. If you have the optional all - terrain wheel kit, make sure the wheels are in good condition. Remember, following these steps will ensure your saw works well for a long time.
