PH18000 Mechanical Pipe Hook

The PH18000 Mechanical Pipe Hook is a top - notch industrial tool with a hefty 18,000 - pound capacity. It's incredibly versatile, fitting pipes with an inner diameter ranging from 24.00 to 72.00 inches, regardless of the pipe's shape. Weighing 1120 pounds, it provides a safe and efficient solution for placing, moving, and setting 8 - foot pipe sections. This mechanical model features a manual slide for adjusting the pipe to its proper balance point. It can handle any type of pipe within the specified ID range and can be hooked up to any machine with the required lifting capacity using a shackle/sling assembly like the Kenco RigMax. Kenco also offers self - balancing versions of pipe hooks for up to 9,000 - pound capacities. Here are the specs of related models: the PH9000 has a 9,000 - pound capacity with a 12 - inch minimum and 48 - inch maximum pipe opening; the PH12000 has a 12,000 - pound capacity, 18 - inch minimum, and 60 - inch maximum pipe opening; the PH18000 (our featured product) has an 18,000 - pound capacity, 24 - inch minimum, and 72 - inch maximum pipe opening; the PH30000 has a 30,000 - pound capacity with a 30 - inch minimum and no max size as long as the weight is within capacity; the PH60000 has a 60,000 - pound capacity with a 36 - inch minimum and no max size as long as the weight is within capacity.

Using the PH18000 Mechanical Pipe Hook is quite straightforward. First, make sure the machine you're using can lift the required capacity and attach it with a shackle/sling assembly like the Kenco RigMax. Then, position the hook on the 8 - foot pipe section. Adjust the manual slide to find the proper balance point of the pipe. When moving or setting the pipe, do it slowly and steadily to ensure safety. As for maintenance, regularly check the hook for any signs of wear and tear, like cracks or excessive rust. Clean it after each use to prevent dirt and debris from building up. Store it in a dry place to avoid corrosion. And always follow the weight capacity limits. Don't try to lift pipes that exceed the 18,000 - pound limit to prevent damage to the hook and potential safety hazards.