Currencies
Shopping Cart  Now in your cart 0 items
Shopping Cart:  0 items
Sub-Total:
$0.00
  1. Your cart is empty.
StoneTech Restore Acidic Cleaner
  • StoneTech Powerful Acidic Tile and Grout Restore Cleaner
  • StoneTech Powerful Acidic Tile and Grout Restore Cleaner
  • StoneTech Powerful Acidic Tile and Grout Restore Cleaner

StoneTech Restore Acidic Cleaner

$147.09  $44.00
Save: 70% off

inclusive of all taxes

Please Choose:

Size

100% Secure Payment

24/7 Dedicated support

Free shipping on all orders

Exchange or money back guarantee for all orders

Description

STONETECH Professional Tile and Grout Restore Cleaner

StoneTech's Restore is a top - notch acidic cleaner that can completely transform the look of your tile and grout, making them look brand new.

Features & Benefits

  • Effectively eliminates hard water deposits, grout haze, efflorescence, and soap scum
  • Designed with professional - grade strength
  • Utilizes an acidic water - based formula
  • Comes in concentrated formulas for cost - effective use

Where to Use

Perfect for ceramic tile, porcelain tile, grout, masonry, and concrete surfaces.

Product Information

  • Product #: D1XXXXXXX
  • Available in packaging sizes: Quart, Gallon, 5 Gallon, 55 Gallon. Part of the StoneTech system. Also available as a 24 oz. Spray. Coverage: Quart Concentrate can cover 500 - 2,500 sq. ft.; Gallon Concentrate can cover 2,000 - 8,000 sq. ft.

Directions

Note: Instructions may vary by size. Always test in a small hidden area first. Make sure to sweep or vacuum the surfaces to remove loose dirt. The heavy - duty mix might darken some surfaces, and this acid - based cleaner can etch marble, limestone, travertine, and most metal surfaces.

1. Protect metals, baseboards, and adjacent areas from splashes and overspray.

2. Spray directly on dirty areas.

3. Scrub with a brush if needed.

4. Wipe off with a clean wet towel or sponge.

5. Rinse well with clean water and dry. Rinse all metal surfaces thoroughly.

6. Clean and rinse your towel and brush with water.

7. Reseal the cleaned area.

Please note that Air shipping is not available for this item.


This StoneTech Restore Acidic Cleaner is a great choice for cleaning tile and grout. First, before using it, test it in a small, hidden area to make sure it works well on your surface. Also, sweep or vacuum the area to get rid of loose dirt. Since it's a heavy - duty acidic cleaner, it might darken some surfaces and etch marble, limestone, travertine, and metal. So, protect these areas and any adjacent ones. Just spray it directly on the dirty spots. If the dirt is tough, use a scrub brush to help clean. Then, wipe it off with a clean wet towel or sponge. After that, rinse the area well with clean water and dry it. Make sure to rinse all metal surfaces thoroughly. Don't forget to clean your towel and brush with water too. Once the area is clean, reseal it. The cleaner comes in different sizes like quart, gallon, 5 - gallon, and 55 - gallon, as well as a 24 - oz spray. The quart concentrate can cover 500 - 2,500 square feet, and the gallon concentrate can cover 2,000 - 8,000 square feet. Remember, air shipping is not available for this product.
Recommend Products
PCD Cup Grinder
$92.00$308.29
G-Tape - Acrylic Flashing
$51.00$89.96
Cleaning-N  Blocks for Diamond Blades
$12.00$23.75

Forklift Tie-Down Clamps
$50.00$696.90
PL2500 Pipe Lift
$50.00$3,150.00
Ferox 230 Stripper
$50.00$1,761.00



Copyright (C) www.hadsalesmk.com 2025 All Rights Reserved.