TigerHawk 2014 Deluxe Orbital Floor Machines

The 2014 TigerHawk Deluxe Orbital Floor Machine is a top - notch cleaning solution. It excels at dry stripping, scrubbing, and stripping tasks. Working much faster than traditional rotary machines, it can easily clean corners and baseboards. There are two models available: the spray system (TH2014 - SP) and the active vacuum system (TH2014 - V). This machine reduces vibration, noise, and operator fatigue while boosting productivity. Key features include a powerful 1.5 HP, 180 frame, TEFC dual capacitor AC motor. It operates on 115 - 230V, 60 Hz power with a 50 ft. 2 - piece (12 - 3) SJT industrial power cord and molded plug. The eccentric balanced orbital drive at 1740 RPM ensures efficient cleaning. A dual vibration isolation system cuts down on operator tiredness. It has a powder - coated heavy - duty steel handle with 5 - position pin lock and WDTM Wheels Down pin - lock handle that disassembles in 60 seconds for easy transport. There's a severe - duty motor guard for protection and 2' x 8' non - marking ball bearing wheels for smooth movement. The 'V' model comes with a vacuum port, 6 - quart tank vacuum, and dust skirt, while the 'SP' model adds a motor - mounted solution pump and 4.5 - gallon solution tank. It also includes an easy - to - move transport cart. With a quiet operation of 60 dB meeting GS42 standards and UL/CUL listing for safety, it's a reliable choice.

Using the 2014 TigerHawk Deluxe Orbital Floor Machine is easy. First, choose the right model for your needs - the spray system (TH2014 - SP) or the active vacuum system (TH2014 - V). Plug it into a 115 - 230V, 60 Hz power source using the provided 50 ft. 2 - piece (12 - 3) SJT industrial power cord. For the 'SP' model, fill the 4.5 - gallon solution tank with the appropriate cleaning solution. Then, start the machine and move it across the floor. It can easily reach corners and baseboards. When you're done, turn off the machine. For easy transport, use the WDTM Wheels Down pin - lock handle to disassemble the handle in 60 seconds. As for maintenance, regularly check the motor and the drive system. Clean the wheels and the machine body to keep it in good condition. Always follow the safety instructions as it is UL/CUL listed. Also, make sure the noise level is within the 60 dB GS42 standard during operation.