The Tuff - Block Steel Wire Brush is a top - notch tool for cleaning hard surfaces. It comes with an np - 9200 Clutch Plate and Riser. All Malish shower feed brushes use our water and chemical - resistant TUFF - BLOCK Shower feed System, which boosts performance and ensures a long lifespan. The Steel Wire TUFF - BLOCK® Shower feed Brush is ideal for cleaning hard surfaces. With a 0.014' diameter steel wire, it's the most aggressive in the series, perfect for unfinished concrete surfaces. The trim length is 1 1/2'. It can be used on heavily soiled concrete and moderate to lightly soiled concrete. Note: It does not include a shower feed hole. Here are the part numbers, block types, and diameters: Part No. 773810 (Wood, 10'), Part No. 773811 (Plastic, 11'), Part No. 773812 (Plastic, 12'), Part No. 773813 (Plastic, 13'), Part No. 773814 (Plastic, 14'), Part No. 773815 (Plastic, 15'), Part No. 773816 (Plastic, 16'), Part No. 773817 (Plastic, 17'), Part No. 773818 (Plastic, 18'), Part No. 773819 (Plastic, 19'), Part No. 773820 (Plastic, 20'), Part No. 773821 (Plastic, 21').
Using the Tuff - Block Steel Wire Brush is easy. First, select the appropriate part number based on your needs. You can use it on heavily soiled concrete or moderately to lightly soiled concrete surfaces. Just press the brush firmly on the surface and move it back and forth to clean. Remember, this brush doesn't have a shower feed hole. When using it on unfinished concrete, be careful as the steel wire is quite aggressive. After use, rinse the brush thoroughly with water to remove dirt and debris. Store it in a dry place to prevent rusting. If the brush shows signs of wear, it might be time to replace it.
