Compact Drill with Automatic Feed in Forward and Reverse Directions
This powerful and reliable drill is a game - changer. It features an MT2 - 3/4' direct arbor with automatic cooling, ensuring smooth operation. The integrated cutting oil reservoir and automatic internal lubrication enhance its performance and longevity.
Specs
- Motor Power: 10.5 Amp / 110 Volt
- Weight: 35 - 1/4 lbs.
- Stroke: 6'
- Hole Capacity: 2' dia. with TCT Carbide cutters | 1 - 3/4' dia. with HSS cutters
- Drilling Depth: 2 - 3/8' with pilot pin | 4 - 3/8' without pilot pin
- Speed: 250 / 450 RPM
- Magnet Base Size: 6 - 5/8' L x 3 - 1/3' W
- Dimensions: 16 - 7/8' H x 9 - 1/8' L x 7 - 3/4' W
- Magnetic Force (1' plate): 3,750 lbs.
- Arbor Bore: 3/4' Weldon Shank
- Automatic Lubrication: Included
Using the AutoMAB 450 is easy. First, find a flat and clean surface to place the drill. Attach the appropriate cutter based on your hole - size needs. If you're going to drill a deep hole, you can use the pilot pin. Plug the drill into a 110 - Volt power source and start it. You can choose between 250 or 450 RPM depending on the task. When using it, make sure the magnet base is firmly attached to the working surface to avoid any movement. As for maintenance, regularly check the cutting oil reservoir and refill it when it's low. Also, clean the drill after each use to keep it in good condition. If you notice any issues, stop using the drill immediately and get it checked by a professional.
