EP8HL VELOCIMAX™ Hazardous Location Air Ventilation Blower

This 8.0 - inch diameter inlet and outlet air ventilation blower is certified by the Canadian Standards Association (CSA). It's suitable for use in National Electric Code Class I Group D, Class II Group G, and Class III hazardous location atmospheres, as well as non - hazardous atmospheres. It comes with a less statically conductive duct. The blower features a.33 HP (.25 Kw), 1725.0 RPM, 60 HZ, 115 VAC, single - phase, explosion - proof, non - vented (TENV) electric motor with single - speed control. It has a radial blower type made of cast aluminum and a steel multi - vane wheel. With rubber anti - vibration mounting, it weighs 73.0 lbs (33.1 kg) and has a flexible 14 - 3 AWG power cord with a male, NEMA 5 - 20P configuration. Dimensions are 19.9 inches (505.5 mm) in height, 18.9 inches (480.1 mm) in length, and 15.4 inches (391.2 mm) in width. Flow rates include 1277.4 CFM (336.2 CMM) in free air, 738.0 CFM (20.9 CMM) with one 90 - degree bend, and 578.8 CFM (16.4 CMM) with two 90 - degree bends.

Using this air ventilation blower is easy. First, make sure the area where you plan to use it is suitable, whether it's a hazardous or non - hazardous location as per the certification. Connect the flexible power cord to a proper power source using the male NEMA 5 - 20P configuration. Once it's plugged in, you can start the single - speed motor. The blower will start circulating air effectively. When using it, avoid blocking the inlet or outlet to maintain good airflow. Also, don't operate it in an environment that exceeds its certified hazardous location ratings. For maintenance, regularly check the rubber mounting for any signs of wear. Keep the blower clean from dust and debris. If you notice any unusual noises or performance issues, turn it off and check for problems. That's all you need to know to use and take care of your blower.