HB-16W 5/8″ Portable Rebar Bender

This amazing portable electric/hydraulic rebar bender comes fully equipped in a blow - molded plastic carrying case. It also includes extra hydraulic oil and a tool kit. The HB - 16W is a heavy - duty machine that can save you a lot of time. At the job site, it can bend rebar up to 5/8” (#5) grade 60 from 0 to 135 degrees right on the spot. It features a double - insulated electric motor and a removable bending guide for consistent angle bends. With the optional 90 - degree bending shoe and collar, you can easily make 90 - degree bends without a guide. The optional bending collar increases the bending radius and reduces rebar breakage, especially for #5 grade 60 rebar. Specifications: Maximum Bending Diameter: 5/8' #5 Rebar (16mm) - Grade 60; Bending Angle / Speed: 0 - 135 degrees / 8 Seconds; Voltage/Amperage: 115V 50/60Hz / 10 amps; Tool Weight: 33 lbs (15 kg); Dimensions L x W x H: 22.8' (585mm) x 7.6' (195mm) x 8' (205mm).

Using this rebar bender is easy. First, make sure it's properly plugged in with the correct voltage (115V 50/60Hz). Place the rebar up to 5/8” (#5) grade 60 into the bender. You can adjust the bending angle from 0 to 135 degrees, and it will bend the rebar in just 8 seconds. If you need to make 90 - degree bends, use the optional 90 - degree bending shoe and collar. When using the optional bending collar, it helps to reduce rebar breakage. As for maintenance, regularly check the hydraulic oil level and top it up if needed. Keep the tool clean and store it in the provided blow - molded plastic case. Also, be careful not to overload the bender with rebar larger than the specified diameter.