Colorcrete is a remarkable pigmented water-based concrete sealer made from a unique blend of 100% waterborne acrylic resins. It leaves a hard, semi-gloss film that protects both interior and exterior concrete surfaces. It can also be used on SurfaceLogix Texture Deck Systems and aged asphalt, and is often used for staining concrete. There are 30 custom colors available (check the chart below). Keep in mind that colors may look different when applied because of variations in cement and application methods. It's always a good idea to combine different batches. Due to differences in computer monitors, we can't guarantee the color accuracy on screen matches the actual product. Note that all sales of colored products are final, and we can't accept returns. This product features exceptional durability, abrasion resistance, water resistance, and is easy to clean up with water. It's an environmentally friendly water-based acrylic product. Applications include concrete driveways, walkways, catwalks, pool decks, as a topcoat for Texture Deck Systems and aged asphalt, asphalt coloring, and concrete staining. Before sealing, surfaces must be clean and dry. The performance of Colorcrete depends on how well the surface is prepared, so remove all grease, oil, and potential contaminants. Concrete should cure for at least 28 days before sealing, and smooth concrete must be etched. Cobble Clean and Cobble Prep can be used for specific cleaning. Applying two thin coats of Colorcrete gives the best results. It's recommended to test the product on your surface first. Read the label carefully before applying the product. For more details, refer to the Colorcrete Technical Data Sheet.
Hey there! Using Colorcrete is easy, but there are a few things you should know. First, make sure the surface you want to seal is clean and dry. Remove any grease, oil, or dirt. If it's concrete, let it cure for at least 28 days. Smooth concrete needs to be etched. You can use Cobble Clean and Cobble Prep for specific cleaning jobs. For the best results, apply two thin coats of Colorcrete. It's a good idea to test it on a small area first to see if you like the color and finish. Remember, colors might look different in real life than on your computer screen. Also, all sales of colored products are final, so no returns. As for maintenance, since it's water-resistant and durable, you won't have much trouble. Just clean it with water when it gets dirty. That's it! Enjoy your protected and colorful surfaces.
